Zanussi Clothes Dryer TC 482 W User Manual

TUMBLE DRYER  
TC 482 W  
DOOR  
OPEN  
DRYING  
T
I
M
E
COTTON  
IRON DRY  
SYNTHETICS  
STORE DRY  
900 1000  
90' -110' 85' -105'  
60' 75' 55' 70'  
STORE DRY  
S
p
u
n
a
t
r
p
m
8
0
0
/
-
-
900  
95'  
60'  
1000  
65'  
40'  
/
1200  
90'  
55'  
800  
/
/
1200  
S
p
u
n
a
t
r
p
m
6
5
0
kg  
5
75'  
45'  
-
-
kg  
kg  
2
1
30'  
25'  
-
-
40'  
35'  
k
g
2
.
5
-
-
IMPORTANT:  
PLEASE READ THE INSTRUCTION BOOK BEFORE USING THIS APPLIANCE  
A
U
T
O
R
E
V
E
R
S
E
T
C
4
8
1
W
INSTRUCTION BOOKLET  
125994190  
 
Contents  
For the Installer  
For the User  
Installation Instructions  
14  
Important Safety Information  
2
2
2
2
G
Technical Specifications  
14  
15  
15  
16  
17  
Installation  
G
I
Child Safety  
Positioning  
G
I
Use  
Stacking kit (optional accessory)  
I
Door reversal  
Your New Tumble Dryer  
Description of the Appliance  
The Control Panel  
4
4
5
5
5
5
6
I
Electrical connection  
G
Water full indicator light  
G
Mains-on light  
G
Time selector dial/ON-OFF switch  
Programme Chart  
Operating Sequence  
Load the laundry  
7
7
7
7
G
G
Select the drying time  
G
When drying is completed  
Hints & Tips on Drying  
8
Maintenance and Cleaning  
External cleaning  
9
9
9
9
9
G
G
Cleaning fluff filter  
G
Cleaning the condenser unit  
G
Emptying the water reservoir  
Something Not Working  
Service and Spare Parts  
Customer Care  
10  
10  
10  
Guarantee Conditions  
Zanussi Service Force  
11  
12-13  
Guide to use the Instruction Book  
The following symbols will be found in the text to guide you throughout the instructions:  
Safety instructions  
Hints and tips  
Environmental information  
3
 
Your New Tumble Dryer  
This tumble dryer will give your wash that soft, relaxed feel whatever  
the weather.  
Extremely high quality standards both during development and  
manufacturing guarantee a long service life for your appliance.  
Maximum economy in the operation of your dryer is achieved through  
very frugal electricity consumption and short drying times.  
Energy saving tips  
In the interest  
To save energy we recommend that you follow these  
hints:  
of the environment  
Materials marked with the symbol  
recyclable.  
G
are  
G
Try to load the maximum capacity of the machine  
as small loads are uneconomical.  
G
G
Check with your local Council or Environmental  
Health Office to see if there are facilities in your  
area for re-cycling this appliance.  
G
Always load well spun laundry. The higher the  
spin speed, the lower the electricity consumption  
and the shorter the drying times.  
When the appliance is to be scrapped, cut off the  
power supply cable and make the door closing  
device unusable to prevent young children from  
being trapped inside.  
G
G
G
Do not over-dry laundry, this avoids creasing and  
saves energy.  
Clean the filter regularly to avoid excessive  
drying times and high electricity consumption.  
G
Help to keep your country tidy - use authorised  
disposal sites for your old appliance.  
Ventilate the room well. The room temperature  
should not exceed +35°C during drying.  
How do we help to protect the  
environment? We use recycled paper!  
Description of the Appliance  
1
2 3  
4
5
1 Worktop  
2 Reservoir Full Indicator Light  
3 Door Open Button  
4 Mains-On Light  
5 Time Selector Dial-ON/OFF switch  
6 Programme Chart  
7 Fluff Filter  
6
7
8 Door Catch  
9 Rating Plate  
10 Ventilation Grille  
11 Water Reservoir  
12 Condenser Unit  
13 Adjustable Feet  
8
9
11  
13  
10  
12  
4
 
The Control Panel  
T
C
4
8
2
W
DOOR  
OPEN  
COTTON  
IRON DRY  
SYNTHETICS  
DRYING  
T I M E  
STORE DRY  
STORE DRY  
Spun at rpm 800 / 900  
1000 / 1200  
65' - 90'  
40' - 55'  
800 / 900 1000 / 1200  
90' -110' 85' -105'  
60' - 75' 55' - 70'  
Spun at rpm 650  
kg  
5
kg 2.5 65' - 75'  
75' - 95'  
45' - 60'  
kg 2.5  
kg  
1
30' - 40'  
IMPORTANT: PLEASE READ THE INSTRUCTION BOOK BEFORE USING THIS APPLIANCE  
A
U
T
O
R
E
V
E
R
S
E
1
2
3
4
5
1 Programme Chart  
This will help you to select the correct time for  
drying.  
4 Mains-On Light (orange)  
This light indicates operating status.  
5 Time Selector Dial-On/Off  
Switch  
Turn the dial clockwise (to the right) to select the  
time for drying (see Chart page 6). At the same time  
the machine is switched on and the programme starts.  
2 Water Full Indicator Light  
(red)  
This light illuminates when the reservoir is full or  
improperly fitted.  
The programme will be interrupted.  
This dryer has two drying cycles of up to 120 and 80  
minutes, giving a high or low heat temperature  
according to the type of fabric.  
3 Door Open Button  
Depress this button to open the door.  
The door of the machine can be opened at any time  
during the programme if you want to feel the dryness  
of the fabrics.  
When selecting the drying time you should remember  
that it includes a 12 minute cooling phase (position  
on the dial).  
This phase should not be shortened, stopped or  
avoided, as this could cause skin burns or damages to  
the laundry.  
5
 
Programme Chart  
Cotton and linen  
Selector dial up to 120 minutes (high temperature section)  
Drying time in minutes for  
laundry spun at  
Amount  
of laundry  
in kg  
Type of laundry:  
Degree of drying  
800/900 rpm  
90-110  
1000/1200 rpm  
85-105  
5
Store dry  
Cotton  
(wardrobe dry)  
Towelling  
Shirts  
Sheets  
Hand towels  
Tablecloths  
Table napkins  
2.5  
5
60-75  
55-70  
75-95  
65-90  
Iron dry  
(not completely dry;  
suitable for ironing)  
2.5  
45-60  
40-55  
Synthetics  
Selector dial up to 80 minutes (low temperature section)  
Drying time in minutes for laundry  
spun at a minimum speed of 650 rpm  
Amount of laundry  
in kg  
Degree of drying  
Type of laundry:  
2.5  
1
65-75  
30-40  
55-65  
Synthetics or mixed fabrics  
which do not require  
ironing.  
Store dry  
2.5  
Synthetics or mixed fabrics  
which have to be ironed.  
(Please see labels on items)  
Iron dry  
1
20-30  
ATTENTION! Please follow the instructions on labels when drying mixed fabrics.  
6
 
Operating Sequence  
Before using your tumble dryer for the first time, we  
recommend to place a few damp cloths inside the  
appliance and dry for approximately 20 minutes.  
There may be dust inside a brand new tumble dryer.  
1. Load the laundry  
Open the door by pressing the relevant button.  
Load the items one at a time, shaking them out  
loosely and close the door.  
Please check the laundry does not get caught between  
the door and filter.  
P0871  
2. Select the drying time  
Turn the selector dial clockwise to the desired time  
(in the high or low temperature section, according to  
the fabric).  
100  
The mains-on light illuminates and the programme  
starts.  
P0486S  
3. When drying is completed  
The machine stops automatically and the mains-on  
light goes out.  
Open the door and take out the laundry.  
Clean the filter after every drying programme.  
A clean filter ensures correct functioning of the  
appliance.  
7
 
Hints & Tips on Drying  
G
Before placing articles of laundry in your tumble  
dryer, check the care labels to ensure they are  
recommended for tumble drying.  
Always load well spun laundry. The higher the  
spin speed the lower the electricity consumption  
and the shorter the drying time.  
G
DO NOT load dripping wet laundry into the  
dryer. Roll the article in a towel or spin to remove  
excess water.  
Care Labels you may find on your laundry  
normal drying (high temperature)  
delicate drying (low temperature)  
may be tumble dried  
G
G
Close poppers and zips and fasten any buttons.  
Sort the laundry. Separate synthetics from  
cotton/linens, and dry separately.  
G
G
Remove the laundry immediately after the  
programme has finished.  
do not tumble dry  
Use a fabric conditioning sheet to reduce static.  
We recommend the sheet is pinned to an article of  
laundry (using a safety pin).  
Do not overload the appliance.  
Here is a list of the approximate weight of some  
common laundry items.  
G
G
Mix the load i.e. large and small articles.  
When drying large items such as sheets, we  
recommend you periodically stop the dryer to  
redistribute the load.  
Sheet  
700 to 1000 g  
100 to 200 g  
400 to 500 g  
50 to 100 g  
Pillowcase  
Tablecloth  
Table Napkin  
Kitchen Towel  
Linen Hand Towel  
Hand Towel  
Bath Towel  
Bathrobe  
DO NOT use the tumble dryer to dry the  
following:  
70 to 120 g  
100 to 150 g  
150 to 250 g  
700 to 1000 g  
1000 to 1500 g  
200 to 300 g  
150 to 200 g  
G
Articles contaminated with inflammable  
substances e.g. petrol, cleaning solvents, cooking  
oil, fats or hair lacquer.  
G
Woollen and synthetic/wool mixtures unless the  
item is labelled as suitable for tumble drying.  
Shirt  
Apron  
G
Very delicate articles such as silk.  
G
Very large and bulky items such as duvets or  
sleeping bags.  
8
 
Maintenance and Cleaning  
You must disconnect the appliance from the  
electricity supply, before you can carry out any  
cleaning or maintenance work.  
Cleaning the condenser unit  
Clean the air condenser periodically, 3 or 4 times a  
year depending on how frequently the dryer is used.  
Pull out the condenser, holding it at the top, and  
remove all fluff. Clean it with a brush and rinse it  
under the shower if necessary.  
External cleaning  
Use only soap and water and then dry thoroughly.  
From time to time, apply a little wax furniture cream  
with a soft cloth.  
Important: do not use methylated spirit, diluents or  
similar products.  
Cleaning the filter  
The tumble dryer cannot operate efficiently with a  
clogged filter. The filter collects all the fluff which  
forms during drying and it is therefore essential to  
remove and clean this filter after each drying  
programme.  
P0636  
P0639  
Also clean the outside, removing all fluff.  
Clean the rubber seal round the porthole door and the  
seal of the condenser in the inner door with a damp  
cloth.  
Emptying the water reservoir  
Water extracted from the laundry condenses inside  
the machine and is collected in a reservoir.  
The reservoir must be emptied after each drying  
cycle to ensure efficient operation when the machine  
is next used.  
P0638  
If this is not done a safety device trips: pilot light  
on the control panel comes on and the programme  
stops, leaving the laundry damp.  
You should not be alarmed by the amount of fluff  
which collects on the filter; this is due to normal  
wearing of the fabrics dried and not to incorrect  
operation of your machine. Rubbing of the fibres  
during normal wear and washing forms fluff. If  
laundry is dried on a line, this fluff simply flies away,  
whereas inside the tumble dryer it collects together  
and swells considerably as a result of the drying  
action.  
The reservoir can be emptied even in the middle of a  
programme.  
P0637  
The reservoir must be re-inserted correctly.  
Handy tip: The condensed water may be used in a  
steam iron or to top up a battery, etc. In this case it  
must be filtered (e.g. through a coffee filter).  
9
 
Something Not Working  
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without  
calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below.  
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect  
use or installation, a charge will be made even if the appliance is under guarantee.  
Symptom  
Possible causes  
G
The door has not been closed.  
The plug is not properly inserted in the power  
socket.  
The tumble dryer does not start  
G
G
G
G
There is no current at the socket  
The main fuse or the fuse in the plug has blown.  
A drying time has not been selected.  
G
The water reservoir is full or not properly  
inserted (the pilot light  
is on).  
G
G
G
G
Drying takes too long or laundry is not  
dry enough.  
The laundry has not been spun properly.  
The filter and/or air condenser are clogged up.  
The room temperature is too high.  
The selected time or section was not suitable for  
the laundry  
G
G
There is too much laundry inside the appliance.  
The dryer is not correctly installed.  
Customer Care  
Service & Spare Parts  
For general enquiries concerning your Zanussi  
appliance or for further information on Zanussi  
products, please contact our Customer Care  
Department by letter or telephone as follows:  
In the event of your appliance requiring service, or if  
you wish to purchase spare parts, please contact your  
local Zanussi Service Force Centre by telephoning:  
0870 5 929929  
Your telephone call will be automatically routed to  
the Service Force Centre covering your post code  
area.  
The addresses are listed on the following pages.  
Before calling out an engineer, please ensure you  
have read the details under the heading “Something  
Not Working”.  
When you contact the Service Force Centre you will  
need to give the following details:  
1. Your name, address and post code  
2. Your telephone number  
Customer Care Department  
Zanussi  
55-77 High Street  
Slough  
Berkshire  
SL1 1DZ  
Tel 08705 727727*  
* calls to this number may be recorded for training  
purposes.  
3. Clear and concise details of fault  
4. The model and serial number of the appliance  
(found on the rating plate - see picture page 4).  
5. The purchase date  
10  
 
Guarantee Conditions  
Standard guarantee conditions  
Exclusions  
We, Zanussi undertake that if, within 12 months of  
the date of the purchase, this Zanussi appliance or  
any part thereof is proved to be defective by reason  
only of faulty workmanship or materials, we will, at  
our option, repair or replace the same FREE OF  
ANY CHARGE for labour, materials or carriage on  
condition that:  
This guarantee does not cover:  
G
Damage or calls resulting from transportation,  
improper use or neglect, the replacement of any  
light bulbs or removable parts of glass or plastic.  
G
Costs incurred for calls to put right an appliance  
which is improperly installed or calls to  
appliances outside the United Kingdom.  
G
The appliance has been correctly installed and  
G
Appliances found to be in use within a  
used only on the electricity supply stated on the  
rating plate.  
commercial environment, plus those which are  
subject to rental agreements.  
G
The appliance has been used for normal domestic  
G
Products of Zanussi manufacture which are NOT  
purposes only, and in accordance with the  
manufacturer’s instructions.  
marketed by Zanussi.  
G
The appliance has not been serviced, maintained,  
repaired, taken apart or tampered with, by any  
person not authorised by us.  
European guarantee  
If you should move to another country within Europe  
then your guarantee moves with you to your new  
home subject to the following qualifications:  
All service work under this guarantee must be  
undertaken by a Zanussi Service Force Centre.  
Any appliance or defective part replaced shall  
become the Company’s property.  
The guarantee starts from the date you first  
G
purchased your product.  
This guarantee is in addition to your statutory and  
other legal rights.  
The guarantee is for the same period and to the  
G
same extent for labour and parts as exists in the  
new country of use for this brand or range of  
products.  
Home visits are made between 8.30am and 5.30pm  
Monday to Friday. Visits may be available outside  
these hours in which case a premium will be  
charged.  
The guarantee relates to you and cannot be  
G
transferred to another user.  
Your new home is within the European  
G
Community (EC) or European Free Trade Area.  
The product is installed and used in accordance  
G
with our instructions and is only used  
domestically, i.e. a normal household.  
The product is installed taking into account  
G
regulations in your new country.  
Before you move please contact your nearest  
Customer Care Centre, listed below, to give them  
details of your new home. They will then ensure that  
the local Service Organisation is aware of your move  
and able to look after you and your appliances.  
France  
Germany  
Italy  
Senlis  
+33 (0)344 62 22 22  
+49 (0)911 323 2600  
+39 (0)1678 47053  
+46 (0)8 738 79 50  
+44 (0)1753 219897  
Nurnberg  
Pordenone  
Stockholm  
Slough  
Sweden  
UK  
11  
 
Zanussi Service Force  
To contact your local Zanussi Service Force Centre telephone 08705 929 929  
ORKNEY  
(M65)  
Corsie Domestics  
7 King Street  
Kirkwall  
CHANNEL ISLANDS  
NORTH EAST  
GUERNSEY  
JERSEY  
Guernsey Electricity  
PO Box 4  
Vale, Guernsey  
Channel Islands  
GATESHEAD  
(M39)  
Unit 356a  
Dukesway Court  
Dukesway  
Team Valley  
Gateshead NE11 0BH  
Orkney KW15  
PERTH  
PERTH  
Hydro Electrical  
Inveralmond House  
Ruthervenfield Road  
Perth PH1 3AQ  
Jersey Electricity Company  
PO Box 45  
Queens Road  
St Helier  
Jersey  
GRIMSBY  
(M42)  
15 Hainton Avenue  
Grimsby  
South Humberside  
DN32 9AS  
Graham Begg  
Unit 4  
Airport Ind Estate  
Wick KW1 4QS  
Channel Islands JE4 8NY  
(OWN SALES)  
SHETLAND  
HULL  
(M41)  
Unit 1  
Boulevard Industrial Estate  
Hull  
HU3 4AY  
Tait Electronic Systems Ltd  
Holmsgarth Road  
Lerwick  
SCOTLAND  
(OWN SALES)  
SHETLAND  
Shetland ZE1 0PW  
ABERDEEN  
(M05)  
54 Claremont Street  
Aberdeen AB10 6RA  
LEEDS  
(M37)  
64-66 Cross Gates Road  
Leeds  
LS15 7NN  
Bolts Shetland Ltd.  
26 North Road  
Lerwick  
AUCHTERMUCHY  
(M03)  
33a Burnside  
Auchtermuchy  
Fife KY14 7AJ  
NEWTON AYCLIFFE Unit 16  
(M45)  
(OWN SALES)  
WHALSAY  
Shetland ZE1 0PE  
Gurney Way  
Aycliffe Industrial Estate  
Newton Aycliffe  
DL5 6UJ  
Leask Electrical  
Harisdale  
Symbister, Whalsay  
Shetland ZE2 9AA  
BLANTYRE  
(M07)  
Unit 5  
Block 2  
Auchenraith Ind. Estate  
Rosendale Way  
Blantyre G72 0NJ  
(OWN SALES)  
SHEFFIELD  
(M38)  
Pennine House  
Roman Ridge Ind.  
Roman Ridge Road  
Sheffield S9 1GB  
DUMFRIES  
(M01)  
93 Irish Street  
Dumfries  
Scotland DG1 2 PQ  
NORTHERN IRELAND  
BELFAST  
(M27)  
Owenmore House  
Kilwee Business Park  
Upper Dunmury Lane  
Belfast  
NORTH WEST  
DUNOON  
(M67)  
Brair Hill  
7 Hill Street  
Dunoon  
BIRKENHEAD  
(M11)  
1 Kelvin Park  
Dock Road  
Birkenhead  
L41 1LT  
Argyll PA23 7AL  
BT17 0HD  
GLASGOW  
(M04)  
20 Cunningham Road  
Clyde Estate  
Rutherglen  
WALES  
CARLISLE  
(M10)  
Unit 7  
Glasgow G73 1PP  
James Street Workshops  
James Street  
Carlisle  
CARDIFF  
(M28)  
Guardian Industrial Estate  
Clydesmuir Road  
Tremorfa  
Cardiff  
CF2 2QS  
INVERNESS  
(M06)  
Unit 3B  
Smithton Ind. Estate  
Smithton  
Cumbria  
CA2 5AH  
Inverness IV1 AJ  
ISLE OF MAN  
(M64)  
South Quay Ind. Estate  
Douglas  
Isle of Man  
CLYWD  
(M14)  
Unit 6-7 Coed Parc  
Abergele Road  
Rhuddlan  
Clwyd  
Wales  
ISLE OF ARRAN  
Arran Domestics  
Unit 4 The Douglas Centre  
Brodick  
IM1 5AT  
(OWN SALES)  
Isle of Arran KA27 8AJ  
LIVERPOOL  
(M15)  
Unit 1  
Honeys Green Precinct  
Honeys Green Lane  
Liverpool  
LL18 5UG  
ISLE OF BARRA  
J Zerfah  
244 Bruernish  
Isle of Barra  
DYFED  
(M77)  
Maes Y Coed  
High Mead  
Llanybydder  
Carmarthenshire  
SA40 9UL  
L12 9JH  
(OWN SALES)  
Western Islands HS9 5QY  
MANCHESTER  
(M09)  
Unit B  
ISLES OF BUTE  
Walker Engineering  
Glenmhor  
Upper Serpentine Road  
Rothesay  
Central Industrial Estate  
St Marks Street  
Bolton  
HAVERFORDWEST Cromlech Lodge  
(M75)  
BL3 6NR  
Ambleston  
Isle of Bute PA20 9EH  
Haverfordwest  
Pembrokeshire  
SA62 5DS  
PRESTON  
(M13)  
Unit 250  
ISLE OF LEWIS  
ND Macleod  
16 James Street  
Stornoway  
Dawson Place  
Walton Summit  
Bamber Bridge  
Preston  
OSWESTRY  
(M17)  
Plas Ffynnon  
Warehouse  
Middleton Road  
Oswestry  
Isle of Lewis PA87 2QW  
Lancashire PR5 8AL  
KELSO  
(M08)  
2-8 Wood Market  
Kelso  
Borders TD5 7AX  
STOCKPORT  
(M16)  
Unit 20 Haigh Park  
Haigh Avenue  
Stockport  
SY11 2PP  
SK4 1QR  
12  
 
Zanussi Service Force  
To contact your local Zanussi Service Force Centre telephone 08705 929 929  
SUNBURY  
(M63)  
Unit 1a  
The Summit  
Hanworth Road  
Hanworth Ind. Estate  
Sunbury on Thames  
TW16 5D  
LONDON & EAST ANGLIA  
MIDLANDS  
BECKENHAM  
11a Gardener Ind. Estate  
Kent House Lane  
Beckenham  
BIRMINGHAM  
(M18)  
66 Birch Road East  
Wyrley Road Ind. Estate  
Witton  
(M79)  
Kent BR3 1QZ  
Birmingham  
B6 6DB  
CHELMSFORD  
(M47)  
Hanbury Road  
Widford Ind. Estate  
Chelmsford  
Essex  
SOUTH EAST  
BOURNE  
(M44)  
Manning Road Ind. Estate  
Pinfold Road  
Bourne  
ASHFORD  
(M58)  
Unit 2  
CM12 3AE  
Bridge Road Business Est.  
Bridge Road  
Ashford  
PE10 9HT  
COLINDALE  
(M53)  
Unit 14  
BRIDGNORTH  
(M72)  
68 St. Marys Street  
Bridgnorth  
Shropshire  
Capitol Park  
Capitol Way  
Colindale  
Kent TN2 1BB  
FLEET  
(M59)  
Unit 1  
WV16 4DR  
London NW9 0EQ  
Redsfield Ind. Estate  
Church Crookham  
Fleet  
GLOUCESTER  
(M23)  
101 Rycroft Street  
Gloucester  
GL1 4NB  
ELTHAM  
(M78)  
194 Court Road  
Mottingham  
Eltham  
Hampshire GU13 0RD  
London SE9 4EW  
HAYWARDS  
HEATH  
(M55)  
21-25 Bridge Road  
Haywards Heath  
Sussex RH16 1UA  
HEREFORD  
(M31)  
Unit 3  
Bank Buildings  
Cattle market  
Hareford  
ENFIELD  
(M49)  
284 Alma Road  
Enfield  
London  
HE4 9HX  
EN3 7BB  
SOUTH WEST  
HIGHAM FERRERS 30 High Street  
(M51)  
GRAVESEND  
(M57)  
Unit B4  
Higham Ferrers  
Northants  
NN10 8BB  
BARNSTAPLE  
(M30)  
Main Road  
Fremington  
Barnstaple  
North Devon EX31 2NT  
Imperial Business Estate  
Gravesend  
Kent  
DA11 0DL  
ILKESTON  
(M43)  
Unit 2  
Furnace Road  
Ilkeston DE7 5EP  
BOURNEMOUTH 63-65 Curzon Road  
(M26)  
HARPENDEN  
(M46)  
Unit 4  
Bournemouth  
Dorset  
BH1 4PW  
Riverside Estate  
Coldharbour Lane  
Harpenden  
AL5 4UN  
LEICESTER  
(M22)  
Unit 7  
Oaks Ind. Estate  
Coventry Road  
Narborough  
Leicestershire  
LE0 5GF  
BRIDGEWATER  
(M35)  
6 Hamp Ind. Estate  
Bridgewater  
Somerset TA6 3NT  
LETCHWORTH  
(M50)  
16-17 Woodside Ind. Estate  
Works Road  
Letchworth  
Herts  
SG6 1LA  
BRISTOL  
(M25)  
11 Eldon Way  
Eldonwall Trading  
Bristol  
LINCOLN  
(M40)  
Unit 8  
Stonefield Park  
Clifton Street  
Lincoln  
Avon BS4 3QQ  
LONDON  
(M76)  
2/4 Royal Lane  
Yiewsley  
West Drayton  
Middlesex  
LN5 8AA  
EMSWORTH  
(M33)  
266 Main Road  
Southbourne  
Emsworth  
NEWCASTLE  
UNDER LYME  
(M12)  
18-21 Croft Road  
Brampton Ind. Estate  
Newcastle under Lyme  
Staffordshire  
UB7 8DL  
PO10 8JL  
MAIDENHEAD  
(M60)  
Reform Road  
Maidenhead  
Berkshire  
ISLE OF WIGHT  
(M34)  
Unit 8  
ST5 0TW  
Enterprise Court  
Ryde Business Park  
Ryde  
SL6 8BY  
REDDITCH  
(M20)  
13 Thornhill Road  
North Moons Moat  
Redditch  
Worcestershire  
B98 9ND  
Isle of Wight PO33 1DB  
MOLESEY  
(M61)  
10 Island Farm Avenue  
West Molesey  
Surrey  
NEWTON ABBOT Unit 2  
(M29)  
Zealley Ind. Estate  
KT8 2UZ  
Kingsteignton  
Newton Abbot  
S. Devon  
NEWBURY  
(M24)  
9 Pipers Court  
Berkshire Drive  
Thatcham  
Berkshire  
RG19 4ER  
TAMWORTH  
(M19)  
Unit 3  
Sterling Park  
Claymore  
Tamworth  
B77 5DO  
TQ12 3TD  
REDRUTH  
Unit 7D  
(M36)  
Pool Ind. Estate  
Wilson Way  
Redruth  
IPSWICH  
(M48)  
Unit 6C  
WORCESTER  
(M73)  
Units 1 & 2  
Elton Park Business Centre  
Hadleigh Road  
Ipswich  
Northbrook Close  
Gregorys Mill Ind. Estate  
Worcester  
Cornwall TR15 3QW  
IP2 0DD  
WR3 8BP  
NORWICH  
(M52)  
2b Trafalgar Street  
Norwich  
NR1 3HN  
13  
 
Installation Instructions  
It is dangerous to alter the specifications or  
attempt to modify this product in any way.  
Care must be taken to ensure that the appliance  
does not stand on the electrical supply cable.  
Any electrical work required to install this  
appliance should be carried out by a qualified  
electrician or competent person.  
Technical Specifications  
DIMENSIONS  
Height  
Width  
Depth  
85 cm (33.5”)  
60 cm (23.6”)  
60 cm (23.6”)  
POWER SUPPLY VOLTAGE  
TOTAL POWER ABSORBED  
230-240 V/50 Hz  
2700 W (13A)  
MAXIMUM RECOMMENDED LOAD  
Cotton, linen  
Synthetics, delicates  
5 kg (11 lbs)  
2.5 kg (5 lbs)  
DRUM VOLUME  
108 l  
This appliance complies with the following E.E.C. Directives:  
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;  
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.  
14  
 
Positioning  
It is recommended that, for your convenience, the  
dryer is positioned close to your washing machine.  
The tumble dryer must be installed in a clean place,  
where dirt does not build up.  
Air must be able to circulate freely all round the  
appliance. Do not obstruct the front ventilation grille  
or the air intake grilles in the back of the machine.  
To keep vibration and noise to a minimum when the  
dryer is in use, it should be placed on a firm, level  
surface.  
Once in its permanent operating position, check that  
the dryer is absolutely level with the aid of a spirit  
level. If it is not, raise or lower the four adjustable  
feet until it is.  
P0046  
The feet must never be removed.  
Do not restrict the floor clearance through deep-  
pile carpets, strips of wood or similar. This might  
cause heat build-up which would interfere with  
the operation of the appliance.  
Important  
When operating the tumble dryer, the room  
temperature must not exceed 35°C, as it may affect  
the performance of the appliance.  
Stacking kit  
A special stacking kit is available through your  
dealer, to enable the mounting of the dryer on top of  
your washing machine.  
P1044  
15  
 
Door Reversal Instructions  
The appliance is supplied with the door opening from  
right to left. If you wish to change the opening  
direction, proceed as follows (see picture A):  
1. Unhook door stopper «A» from its seat «a» and  
loosen from hole «b» by a 90° rotation.  
F
2. Remove the plastic plug from hole «c» by a 90°  
rotation and re-fix in hole «b».  
c
d
3. Unscrew hinge «B» (loosen the 2 screws, holding  
the door securely) and lower the door from the  
top pivot.  
D
b
4. Re-insert pin «F» from the door above and below  
on opposite sides respectively.  
A
B
C
a
5. Loosen door catch «C» by pressing both lugs  
together (see small illustration).  
E
6. Loosen opposite plastic part «D» as in step 5  
(you may need to use a screwdriver to assist in  
both steps 5 and 6 ).  
7. Interchange and insert parts «C» and «D».  
C
8. Remove screws «E» and refit on the opposite  
side. Fix hinge «B» on the right handside.  
Do not fully tighten the screws.  
1
2
1
A
P0866  
9. To mount door, see picture B:  
I
First locate into upper right hand hole with upper  
pin «F».  
I
Then place lower pin into the hinge «B» at the  
c
F
bottom of the door.  
I
Align door before tightening hinge.  
d
A
I
Tighten hinge.  
10. Remove the plug from hole «d» and refix in  
hole«a» (Fig. A).  
11. Fix door stopper «A» in hole «c» by 90° rotation.  
12. Hook door stopper «A» into hole «d».  
B
C
B
P0865  
16  
 
Electrical connection  
Any electrical work required to install this appliance  
should be carried out by a qualified electrician or  
competent person.  
WARNING: THIS APPLIANCE MUST BE  
EARTHED.  
The manufacturer declines any liability  
should this safety measure not be observed.  
Before switching on, make sure the electricity supply  
voltage is the same as that indicated on the  
appliance’s rating plate. (See picture page 4).  
The appliance is supplied with a 13amp plug fitted.  
In the event of having to change the fuse in the plug  
supplied, a 13amp ASTA approved (BS1363A) fuse  
must be used.  
Should the plug need to be replaced for any reason,  
proceed as described below.  
The wires in the mains lead are coloured in  
accordance with the following code:  
Green and Yellow  
Blue  
- Earth  
- Neutral  
- Live  
GREEN & YELLOW  
E
Brown  
The wire coloured green and yellow must be  
L
N
connected to the terminal marked with the letter «E»  
or by the earth symbol  
or coloured green and  
yellow.  
BROWN  
BLUE  
CORD CLAMP  
The wire coloured blue must be connected to the  
terminal «N» or coloured black.  
P1041  
The wire coloured brown must be connected to the  
terminal marked «L» or coloured red.  
Upon completion there must be no cut, or stray  
strands of wire present and the cord clamp must be  
secure over the outer sheath.  
WARNING:  
A cut off plug inserted into a 13 amp socket  
is a serious safety (shock) hazard.  
Ensure that the cut off plug is disposed of  
safely.  
Permanent connection  
In the case of permanent connection it is necessary  
that you install a double pole switch between the  
appliance and the electricity supply (mains), with a  
minimum gap of 3mm between the switch contacts  
and of a type suitable for the required load in  
compliance with the current electrical regulations.  
The switch must not break the yellow and green earth  
cable at any point.  
17  
 
From the Electrolux Group. The world’s No. 1 choice.  
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor  
use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines,  
vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in  
more than 150 countries around the world.  
© Electrolux Household Appliances Limited 2000  
 

Weil McLain Burner 800057000 Brn PO Rie F5 User Manual
Westinghouse Landscape Lighting 71910 User Manual
Whirlpool Air Conditioner ACQ142 User Manual
Whirlpool Dishwasher 9200 SERIES User Manual
Whirlpool Microwave Oven WMH1162XVB1 User Manual
Whirlpool Oven GMC275PRQ00 User Manual
Zanussi Clothes Dryer 136905611 00 02092008 User Manual
Zanussi Range ZCM 630 User Manual
Zanussi Washer F 1203 W User Manual
Zephyr Ventilation Hood Z1C01ML User Manual