Wall Mounted Hoods – Install Quick Specs
WSL Series Hoods - 24” Depth
Installation Type & Discharge Direction
Wall – vertical discharge
Wiring Access
Discharge Size off Hood Top
14” x 4 ¼” rectangular
Discharge Transition – purchased
separately
See “Ventilation” section for options
18"
3"
Standard Features
•
•
304 Series, 18 gauge stainless steel
Halogen lighting (dual 50 watt lamps 30” to
48” widths/four 50 watt lamps 54” or
greater widths) with Hi/Lo setting
Commercial-grade, high luster stainless
steel baffle filters
All Stainless Steel Finish Hoods can be
installed Indoors or Outdoors (see
Installation Instructions)
Wiring Access
•
•
Knockouts For
Dual Blowers
•
Widths: 30” to 60” in 6” increments
3"
18"
Finishes
•
Stainless Steel (S), White (W), Essence of
Copper (E) and Pewter (P)
Stainless Steel with Polished Chrome
Accents (SPC)
•
Optional Upgrades
U
L
U
•
250 Watt Heat Lamp Fixtures (add “H” to
hood model number) e.g. WSL304SH
6” or 12” Canopy Extensions in matching
finish (Model(s): 6CE30S or 12CE30S for
30” wide hood in stainless steel finish).
NOTE: Specify desired canopy height,
width and finish when ordering.
L
LISTED7Z66
C
•
•
•
Chrome or Brass Rolled Pot Rails (Model:
ACCBRC or ACCBRB) –indoor use only
Stainless Steel Back Splash with drop-
down chrome racks supports a maximum
of 30 lbs. (BS plus width – Model: BS30)
13"
“BS” Warming Shelf Accessory with Chrome Racks
Hood Carton Weight:
WSL304 = 68 lbs.
WSL364 = 76 lbs.
WSL424 = 83 lbs.
WSL484 = 95 lbs.
WSL544 = 100 lbs.
WSL604 = 113 lbs.
Copyright 2006 Wind Crest by CNP Industries
Install Quick Specs are for planning purposes only. Please refer to the detailed installation instructions, prior to
1
making any cutouts.
|