Model No. WLTL13921
Serial No.
USER’S MANUAL
Serial Number Decal
QUESTIONS?
As a manufacturer, we are
committed to providing com-
plete customer satisfaction. If
you have questions, or if there
are missing parts, we will guar-
antee complete satisfaction
through direct assistance from
our factory.
TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLL-
FREE CUSTOMER HOT LINE.
The trained technicians on our
customer hot line will provide
immediate assistance, free of
charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.–Fri., 6 a.m.– 6 p.m. MST
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manu-
al for future reference.
Visit our website at
new products, prizes,
fitness tips, and much more!
BEFORE YOU BEGIN
Thank you for selecting the new WESLO® AEROBIC
STRIDE treadmill. The AEROBIC STRIDE treadmill is
designed to let you enjoy effective cardiovascular
workouts in the comfort and convenience of your
home. And when the AEROBIC STRIDE treadmill is
not in use, it can be folded up, requiring less than half
the space of other treadmills.
Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time
(excluding holidays). To help us assist you, please
note the product model number and serial number
before calling. The model number is WLTL13921. The
serial number can be found on a decal attached to the
treadmill (see the front cover of this manual to find the
location of the decal).
For your benefit, read this manual carefully before
using the treadmill. If you have questions after read-
ing this manual, please call our Customer Service
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Console
Water Bottle Holder
(Bottle not included)
Heart Rate Chart
Handrail
Short Pin
Flywheels
Long Pins
Walking Belt
Roller Guards
Rear Roller Adjustment Bolts
3
ASSEMBLY
The help of a second person is recommended. Set the treadmill in a cleared area and remove all packing
materials. Do not dispose of the packing materials until assembly is completed. Assembly requires a phillips
screwdriver
and an adjustable wrench
(not included).
1. Slide the Handrail (6) onto the four welded bolts in the
Base (19) as shown.
1
See the inset drawing. Attach each side of the Handrail
(6) to the Base (19) with two M8 Nylon Nuts (16).
6
19
6
16
19
Bolts
2. Lift the front of the Frame (32, 35) and align the holes
near the front of the Frame with one of the three sets of
holes in the Handrail (6). Insert the two Long Pins (5)
into the Handrail and the Frame. Make sure that the
Long Pins are fully inserted at the same level.
2
6
5
32
5
See the inset drawing. Insert a Cotter Pin (8) into the
hole near the end of each Long Pin (5). Make sure that
the Cotter Pins are fully inserted.
8
35
5
3. Attach the Console Plate (2) to the Handrail (6) with two
M4 x 16mm Screws (3) as shown. Feed the Reed
Switch Wire (7) up through the indicated hole in the
Console Plate.
3
1
Hold the Console (1) near the Console Plate (2). Plug
the Reed Switch Wire (7) into the back of the Console.
Feed the excess Reed Switch Wire down through the
hole in the Console Plate. Attach the Console to the
Console Plate with four M4 x 16mm Screws (3). Be
careful not to pinch the Reed Switch Wire.
3
2
6
7
3
3
3
4
4. Insert the Reed Switch (7) into the Reed Switch Clip
(14) as shown. Attach the Reed Switch Clip to the left
side of the Frame (32) with an M4 x 16mm Screw (3).
Do not fully tighten the Screw yet.
4
Top View
3
Refer to the inset drawing. Locate the Magnet (15) on
the left Flywheel (12). Turn the Flywheel until the
Magnet is aligned with the Reed Switch (7). Slide the
Reed Switch so that there is a 1/8” gap between the
Reed Switch and the Magnet. Then, tighten the M4 x
16mm Screw (3).
12
15
3
14
7
1/8”
32
5
7
5. The Console (1) requires two "AA" batteries (not includ-
ed). Alkaline batteries are recommended. Remove the
Battery Cover (33) by sliding it upward. Insert two batter-
ies into the battery clip, making sure that the negative
(–) ends of the batteries are touching the springs in
the battery clip. Insert the battery clip back into the
Console and slide the Battery Cover (33) back into
place.
33
Battery Clip
1
Batteries
6. Remove the backing from the Adhesive Clip (37). Press
the Adhesive Clip onto the left side of the Frame (32) in
the indicated location. Press the Allen Wrench (26) into
the Adhesive Clip.
6
Make sure the walking belt is properly tightened (see
SYMPTOM 3 on page 8).
26
37
32
7. Make sure that all parts are properly tightened before you use the treadmill. To protect the floor or car-
pet, place a mat under the treadmill.
5
TREADMILL OPERATION
LUBRICATING THE WALKING PLATFORM
Follow the steps below to operate the console.
Before the treadmill is used, the walking platform
should be lubricated. Open the included lubricant
bottle. Reach under one side of the walking belt as far
as you can, and apply half of the lubricant to the walk-
ing platform. Then, reach under the other side of the
walking belt and apply the remainder of the lubricant.
After you have applied the lubricant, walk on the
treadmill for a few minutes to spread the lubricant.
1. Turn on the power.
To turn on the power, press the on/reset button or
simply begin walking. When the power is turned on,
the entire display will appear for two seconds. The
console will then be ready for use. Note: If batteries
were just installed, the power will already be on.
2. Follow your progress with the five modes.
When the power is
turned on, the con-
sole will automatical-
ly scan through five
modes. A flashing
mode indicator will
show which mode is
currently displayed.
The modes are
Mode Indicator
Apply lubricant here
described below.
• Speed—This mode displays your speed, in miles
per hour.
STEP-BY-STEP CONSOLE OPERATION
• Time—This mode displays the elapsed time.
Before the console can be operated, batteries must be
installed (see assembly step 5 on page 5). If there is a
thin sheet of plastic on the console, remove the plastic.
• Distance (DIST)—This mode displays the total
number of miles you have walked.
• Fat Calories (FAT CALS)—This mode displays the
approximate number of fat calories you have
burned (see BURNING FAT on page 9).
• Calories (CALS)—This mode displays the approx-
imate number of calories you have burned.
To reset the display, press the on/reset button.
3. Turn off the power.
To turn off the power, simply wait for a few min-
utes. If the walking belt is not moved and the con-
sole button is not pressed for a few minutes, the
power will turn off automatically.
6
INCLINE ADJUSTMENT
FOLDING THE TREADMILL FOR STORAGE
The incline of the treadmill can be adjusted to any of
three positions. Hold the front of the Frame (32, 35),
and remove the Long Pins (5). Raise or lower the
Frame, align the holes in the Frame with one of the
sets of holes in the Handrail (6), and re-insert the
Long Pins. Make sure the Long Pins are fully
inserted at the same level. Refer to the inset draw-
ing. Insert a Cotter Pin (8) into the end of each Long
Pin.
When the treadmill is not in use, it can be folded to
the compact storage position. CAUTION: You must
be able to safely lift 25 pounds (11 kg) to raise,
lower, or move the treadmill.
1. Hold the treadmill with your hands in the locations
shown below. CAUTION: To decrease the possi-
bility of injury, bend your legs and keep your
back straight. As you raise the treadmill, make
sure to lift with your legs rather than your back.
Raise the treadmill to the vertical position.
6
5
1
35
5
32
8
5
CAUTION:
shown, the Long Pins may slip out, resulting
in injury to the user.
If the Cotter Pins (8)
are not inserted into the Long Pins (5) as
2. Hold the treadmill
2
securely with your
left hand as
shown. Insert the
Short Pin (4) into
the hole in the
right side of the
Handrail (6) and
into the Frame
6
(35) as far as it
will go.
35
4
LOWERING THE TREADMILL FOR USE
1. Hold the treadmill securely with your left hand as
shown in drawing 2 above. Pull out the Short Pin
(4). Pivot the treadmill down a few inches and re-
insert the Short Pin.
2. Hold the treadmill firmly with both hands, and lower
the treadmill to the floor. CAUTION: To decrease
the possibility of injury, bend your legs and
keep your back straight.
7
MAINTENANCE AND TROUBLESHOOTING
Most problems can be solved by following the simple steps below. If further assistance is needed, call
our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m.
Mountain Time (excluding holidays).
1. SYMPTOM: THE CONSOLE DOES NOT
FUNCTION PROPERLY
3. SYMPTOM: THE WALKING BELT SLIPS OR IS
OFF-CENTER
a. Replace the batteries in the console (see assem-
bly step 5 on page 5).
a. If the walking
belt slips
when walked
b. Make sure that the reed switch is properly adjust-
ed (see assembly step 4 on page 5).
on, use the
allen wrench to
turn both
c. Make sure that the reed switch wire is plugged
fully into the back of the console (see assembly
step 3 on page 4).
adjustment
bolts clockwise,
1/4 of a turn. When the walking belt is correctly
tightened, you should be able to lift each side of
the walking belt 2 to 3 inches. Walk on the tread-
mill for a few minutes. Repeat until the walking
belt is properly tightened. Be careful to keep the
walking belt centered.
d. The console, like most electronics, is susceptible
to static electricity build-up caused by certain
types of clothing or by the operation of the tread-
mill. If the display is blank or gives incorrect read-
ings, apply an anti-static spray to the handrail.
Anti-static spray is available where laundry sup-
plies are sold.
b. If the walking
belt has shift-
ed to the left
2. SYMPTOM: THE WALKING BELT DOES NOT
MOVE SMOOTHLY
side, use the
allen wrench to
turn the left
a. If the walk-
adjustment bolt
ing belt is
overtight-
ened, per-
formance
clockwise, and
Walking Belt
the right adjustment bolt counterclockwise, 1/4 of
a turn each. Be careful not to overtighten the
walking belt. Walk on the treadmill for a few min-
utes. Repeat until the walking belt is centered.
may be
reduced and
the walking
belt may be
permanently
2"–3"
c. If the walking
Bolts
belt has shift-
ed to the right
damaged. Using the allen wrench, turn both rear
roller adjustment bolts counterclockwise 1/4 of a
turn. When the tension of the walking belt is cor-
rect, you should be able to lift each side of the
walking belt 2 to 3 inches. Walk on the treadmill
for a few minutes. Repeat until the walking belt is
properly tightened. Be careful to keep the walking
belt centered.
side, use the
allen wrench to
turn the left
adjustment bolt
counterclock-
wise, and the right adjustment bolt clockwise, 1/4
of a turn each. Be careful not to overtighten the
walking belt. Walk on the treadmill for a few min-
utes. Repeat until the walking belt is centered.
8
CONDITIONING GUIDELINES
The following guidelines will help you to plan your
exercise program. Remember that proper nutrition and
adequate rest are essential for successful results.
Burning Fat
To burn fat effectively, you must exercise at the proper
intensity level for a sustained period of time. During
the first few minutes of exercise, your body uses easi-
ly accessible carbohydrate calories for energy. Only
after the first few minutes does your body begin to use
stored fat calories for energy. If your goal is to burn
fat, adjust the intensity of your exercise until your
heart rate is between the lower two numbers in your
training zone as you exercise.
WARNING:
Before beginning this
or any exercise program, consult your physi-
cian. This is especially important for individu-
als over the age of 35 or individuals withpre-
existing health problems.
Aerobic Exercise
WHY EXERCISE?
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be “aerobic.” Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For effective aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your train-
ing zone.
Exercise has proven essential for good health and
well-being. A well-rounded exercise program helps to
develop a stronger and more efficient heart, improved
respiratory function, increased stamina, better weight
management, increased ability to handle stress, and
greater self-esteem.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows
recommended heart rates for fat burning and aerobic
exercise.
HOW TO MEASURE YOUR HEART RATE
To measure your
heart rate, stop exer-
cising and place two
fingers on your wrist
as shown. Take a
six-second heartbeat
count, and multiply
the result by ten to
find your heart rate.
(A six-second count is used because your heart rate
drops quickly when you stop exercising.) If your heart
rate is too high, decrease the intensity of your exer-
cise. If your heart rate is too low, increase the intensity
of your exercise.
WORKOUT GUIDELINES
Each workout should include the following three impor-
tant parts:
A warm-up, consisting of five to ten minutes of
stretching and light exercise. This will increase your
body temperature, heart rate, and circulation in prepa-
ration for exercise.
To find the proper heart rate for you, first find your age
at the bottom of the chart (ages are rounded off to the
nearest ten years). Next, find the three numbers
above your age. The three numbers are your “training
zone.” The lower two numbers are recommended
heart rates for fat burning; the highest number is the
recommended heart rate for aerobic exercise.
Training zone exercise, including 20 to 30 minutes of
exercise with your heart rate in your training zone.
9
A cool-down, consisting of five to ten minutes of
stretching. Stretching after exercise is effective for
increasing flexibility and helps to offset problems
caused when you stop exercising suddenly.
Instead of waiting for a convenient time to exercise,
plan a specific time. The morning hours work well for
many, and the self-discipline required to rise early and
exercise increases productivity throughout the day. For
others, exercising before dinner helps them to relax.
Whatever time you choose, be consistent. The key to
success is to make exercise a regular and enjoyable
part of your everyday life.
EXERCISE FREQUENCY
To maintain or improve your condition, plan three
workouts each week, with at least one day of rest after
each workout. After a few months of regular exercise,
you may complete up to five workouts each week, if
desired.
PART LIST—Model No. WLTL13921
R0103A
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
1
1
13
1
2
1
1
2
6
8
2
1
2
1
1
4
2
2
1
Console
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
#
4
4
1
2
1
1
1
2
2
2
1
1
1
1
1
1
1
1
1
Base Pad
Console Plate
M4 x 16mm Screw
Short Pin
Long Pin
Handrail
Base Pad Screw
Left Roller Guard
Base Endcap
Walking Belt
Walking Platform
Allen Wrench
Reed Switch/Wire
Cotter Pin
Frame Foot
M6 x 26mm Bolt
M6 Nylon Nut
Frame Endcap
Front Roller/Flywheels
M6 x 29mm Bolt
Reed Switch Clip
Magnet
M8 Nylon Nut
Belt Guide
Flywheel Set Screw
Base
Rear Roller Adjustment Bolt
Rear Roller Washer
Left Frame Plate
Rear Roller
Left Frame
Battery Cover
Right Roller Guard
Right Frame
Right Frame Plate
Adhesive Clip
User’s Manual
“#” Indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover for
information about ordering replacement parts.
10
EXPLODED DRAWING—Model No. WLTL13921
R0103A
33
3
7
1
2
3
3
6
3
3
8
14
5
15
11
24
7
18
12
4
9
18
8
12
9
25
9
11
5
9
32
10
13
9
16
22
3
35
17
9
30
10
29
28
31
13
19
27
34
20
21
3
10
36
29
26
23
20
21
37
10
27
28
3
20
21
23
20
21
11
ORDERING REPLACEMENT PARTS
To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). When ordering parts, please be prepared
to give the following information:
• The MODEL NUMBER of the product (WLTL13921)
• The NAME of the product (WESLO® AEROBIC STRIDE treadmill)
• The SERIAL NUMBER of the product (see the front cover of this manual)
• The KEY NUMBER and DESCRIPTION of the part(s) needed (see page 10 of this manual)
WESLO is a registered trademark of Health & Fitness, Inc.
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-
chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-
ited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be pre-authorized by ICON. This warranty does not
extend to any product or damage to a product caused by or attributable to freight damage, abuse, mis-
use, improper or abnormal usage or repairs not provided by an ICON authorized service center; products
used for commercial or rental purposes; or products used as store display models. No other warranty
beyond that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-
dental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 196086 R0103A
Printed in China © 2003 ICON Health & Fitness, Inc.
|