Model No. 831.150260
Serial No.
Write the serial number in the
space above for reference.
WEIGHT BENCH EXERCISER
User’s Manual
Serial Number Decal (under seat)
• Assembly
• Adjustments
• Part List and Drawing
Patent Pending
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read the following important precautions
before using the weight bench.
1. Read all instructions in this manual before
using the weight bench. Use the weight
bench only as described in this manual.
7. Keep children under 12 and pets away from
the weight bench at all times.
8. Always wear athletic shoes for foot protec-
tion while exercising.
2. It is the responsibility of the owner to ensure
that all users of the weight bench are ade-
quately informed of all precautions.
9. The weight bench is designed to support a
maximum of 410 pounds, including a maxi-
mum user weight of 300 pounds. Do not use
more than 110 pounds of weight with the
weight bench.
3. The weight bench is intended for home use
only. Do not use the weight bench in any
commercial, rental, or institutional setting.
4. Use the weight bench only on a level surface. 10. Always make sure that the locking pin is fully
Cover the floor beneath the weight bench to
protect the floor.
inserted into the pivot bracket and the frame
before exercising.
5. Make sure all parts are properly tightened
each time the weight bench is used. Replace
any worn parts immediately.
11. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cool-
ing down.
6. Keep hands and feet away from moving parts.
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. Sears assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
3
BEFORE YOU BEGIN
Thank you for selecting the versatile WEIDER® PRO
202 weight bench. The weight bench is designed to
help develop the major muscle groups of the upper
body. Whether your goal is to tone your body, build
dramatic muscle size and strength, or improve your
cardiovascular system, the weight bench will help you
to achieve the specific results you want.
reading this manual, call 1-800-4-MY-HOME®
(1-800-469-4663). To help us assist you, please note
the product model number and serial number before
calling. The model number is 831.150260. The serial
number can be found on a decal attached to the
weight bench (see the front cover of this manual).
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
For your benefit, read this manual carefully before
using the weight bench. If you have questions after
ASSEMBLED
DIMENSIONS:
Height: 54 in.
Width: 18 in.
Depth: 40 in.
Backrest
Seat
Dumbbell
Foam Pad
Front Leg
Dumbbell Storage Rack
4
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST on page 11 of this manual. Note: Some parts may have
been pre-assembled for shipping purposes. If you cannot find a part in the parts bags, check to see if it
has been pre-assembled. If a part is missing, call toll-free 1-800-999-3756.
M6 x 60mm Bolt (31)
M6 Washer (22)
M10 Large Washer (27)
M10 x 63mm Bolt (30)
M10 x 20mm Bolt (25)
M10 x 63mm Carriage Bolt (18)
M6 x 16mm Bolt (24)
M10 Washer (20)
M4 x 16mm Screw (28)
M10 x 70mm Bolt (26)
M10 x 85mm Bolt (23)
M10 Nylon Locknut (19)
5
ASSEMBLY
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
Make Things Easier for Yourself
This manual is designed to ensure that the
weight bench can be assembled successfully
by anyone. Most people find that by setting
aside plenty of time, assembly will go smoothly.
The following tools (not included) are required
for assembly:
• Two adjustable wrenches
• One rubber mallet
Before beginning assembly, carefully read the
following information and instructions:
• One standard screwdriver
• Assembly requires two people.
• One Phillips screwdriver
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• Lubricant, such as grease or petroleum jelly,
and soapy water.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
1.
1
Before assembling the weight bench, make
sure that you understand the information in
the box above.
14
Name
Decal
2
Press a 45mm Square Inner Cap (14) into the top
of the Front Leg (2). Press two 50mm Round Outer
Caps (12) onto the ends of the Black Stabilizer
(29).
19
12
19
Attach the Black Stabilizer (29) to the Front Leg (2)
with two M10 x 63mm Carriage Bolts (18) and two
M10 Nylon Locknuts (19). Be sure the indents in
the Stabilizer and the name decal on the Front
Leg are in the positions shown. Do not tighten
the Locknuts yet.
29
Indents
18
12
2
13
Slot
2. Press four 50mm Square Inner Caps (13) into the
tubes on the Frame (1). Make sure the slots on
the Caps are vertical to accommodate the
Screws (not shown) that will attach the Seat
(not shown) to the Frame.
Slot
1
19
27
30
Attach the Frame (1) to the Front Leg (2) with two
M10 x 63mm Bolts (30), two M10 Large Washers
(27), and two M10 Nylon Locknuts (19). Do not
tighten the Locknuts yet.
19
20
13
2
6
3. Press two 50mm Round Outer Caps (12) onto the
ends of the Silver Stabilizer (4).
3
12
Indents
18
19
20
Attach the Silver Stabilizer (4) to the Rear Leg (3)
with two M10 x 63mm Carriage Bolts (18) and two
M10 Nylon Locknuts (19). Be sure the indents,
the warning decal, and the Rear Leg are orient-
ed as shown. Do not tighten the Locknuts yet.
1
4
3
19
Warning
Decal
12
Attach the Rear Leg (3) to the Frame (1) with two
M10 x 20mm Bolts (25) and two M10 Washers
(20).
25
4
10
Tighten the M10 Nylon Locknuts (19) used in
steps 1–3.
11
9
4. Press two 25mm Square Inner Caps (11) into a
Pad Tube (10).
2
Slide the Pad Tube (10) into the Front Leg (2).
Wet the ends of the Pad Tube with soapy water.
Slide two Foam Pads (9) onto the ends of the
Pad Tube.
10
9
Repeat this step with the other Pad Tube (10).
11
5. Press a 25mm x 50mm Inner Cap (15) into the
Backrest Frame (5).
5
15
19
Attach the Pivot Bracket (6) to the Backrest
Frame (5) with two M10 x 70mm Bolts (26) and
two M10 Nylon Locknuts (19). Do not tighten the
Locknuts yet.
5
6
26
Insert the Pivot Bracket (6) into the slot in the
Frame (1).
Slot
1
6. Lubricate the M10 x 85mm Bolt (23) with grease.
Attach the Backrest Frame (5) to the Frame (1)
with the Bolt and an M10 Nylon Locknut (19). Do
not overtighten the Locknut; the Backrest
Frame must be able to pivot easily.
6
5
19
6
Attach the tether on the Locking Pin (21) to the
bottom of the Frame (1) with the M4 x 16mm
Screw (28).
1
21
Insert the Locking Pin (21) into the Frame (1) and
through an adjustment hole in the Pivot Bracket
(6).
28
23
See the inset drawing. Attach an M10 x 20mm
Bolt (25) and an M10 Nylon Locknut (19) to the
last hole in the Pivot Bracket (6).
25
6
19
Tighten the M10 Nylon Locknuts (19) used in
step 5.
7
7. Attach the Backrest (7) to the Backrest Frame (5)
with four M6 x 16mm Bolts (24). Be sure the
Backrest is oriented as shown.
7
7
5
24
24
8. Attach the Seat (8) to the Frame (1) with four M6
x 60mm Bolts (31) and four M6 Washers (22). Be
sure the wide end of the Seat is on the side
shown.
8
8
Wide
End
1
Set the Dumbbells (not shown) onto the dumbbell
storage racks on the Frame (1).
Dumbbell
Storage
Rack
22
22
9. Make sure all parts are properly tightened
31
31
before you use the weight bench.
ADJUSTMENTS
This section explains how to adjust the weight bench. See the EXERCISE GUIDELINES on page 9 for important
information about how to get the most benefit from your exercise program. Also, refer to the accompanying exer-
cise guide to see the correct form for each exercise.
Make sure all parts are properly tightened each time the weight bench is used. Replace any worn parts immediate-
ly. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.
ADJUSTING THE BACKREST
The Backrest (7) can be used in a declined, a level,
or any of four inclined positions. To adjust the
Backrest, remove the Locking Pin (21) from the
Frame (1). Move the Backrest to the desired position
and reinsert the Locking Pin into the Frame and an
adjustment hole in the Pivot Bracket (6).
7
WARNING:
Always make sure the
Locking Pin (21) is fully inserted through the
Frame (1) and the Pivot Bracket (6).
21
1
6
Adjustment
Holes
8
EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS
PERSONALIZING YOUR EXERCISE PROGRAM
Muscle Building
To increase the size and strength of your muscles,
Determining the exact length of time for each workout,
as well as the number of repetitions or sets completed,
push them close to their maximum capacity. Your mus- is an individual matter. It is important to avoid overdo-
cles will continually adapt and grow as you progres-
sively increase the intensity of your exercise. You can
adjust the intensity level of an individual exercise in
two ways:
• by changing the amount of resistance used
• by changing the number of repetitions or sets per-
formed. (A “repetition” is one complete cycle of an
exercise, such as one sit-up. A “set” is a series of
repetitions.)
ing it during the first few months of your exercise pro-
gram. You should progress at your own pace and be
sensitive to your body’s signals. If you experience pain
or dizziness at any time while exercising, stop immedi-
ately and begin cooling down. Find out what is wrong
before continuing. Remember that adequate rest and a
proper diet are important factors in any exercise pro-
gram.
WARMING UP
The proper amount of resistance for each exercise
depends upon the individual user. You must gauge
your limits and select the amount of resistance that is
Begin each workout with 5 to 10 minutes of stretching
and light exercise to warm up. Warming up prepares
right for you. Begin with 3 sets of 8 repetitions for each your body for more strenuous exercise by increasing
exercise you perform. Rest for 3 minutes after each
set. When you can complete 3 sets of 12 repetitions
without difficulty, increase the amount of resistance.
circulation, raising your body temperature and deliver-
ing more oxygen to your muscles.
WORKING OUT
Toning
You can tone your muscles by pushing them to a mod- Each workout should include 6 to 10 different exercis-
erate percentage of their capacity. Select a moderate
amount of resistance and increase the number of rep-
etitions in each set. Complete as many sets of 15 to
20 repetitions as possible without discomfort. Rest for
1 minute after each set. Work your muscles by com-
es. Select exercises for every major muscle group,
emphasizing areas that you want to develop most. To
give balance and variety to your workouts, vary the
exercises from session to session.
pleting more sets rather than by using high amounts of Schedule your workouts for the time of day when your
resistance.
energy level is the highest. Each workout should be
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.
Weight Loss
To lose weight, use a low amount of resistance and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.
EXERCISE FORM
Maintaining proper form is an essential part of an
effective exercise program. This requires moving
through the full range of motion for each exercise, and
Cross Training
Cross training is an efficient way to get a complete and moving only the appropriate parts of the body.
well-balanced fitness program. An example of a bal-
anced program is:
• Plan strength training workouts on Monday,
Wednesday, and Friday.
• Plan 20 to 30 minutes of aerobic exercise, such as
running on a treadmill or riding on an elliptical or
exercise bike, on Tuesday and Thursday.
Exercising in an uncontrolled manner will leave you
feeling exhausted. On the exercise guide accompany-
ing this manual you will find photographs showing the
correct form for several exercises, and a list of the
muscles affected. Refer to the muscle chart on the
next page to find the names of the muscles.
• Rest from both strength training and aerobic exercise The repetitions in each set should be performed
for at least one full day each week to give your body
time to regenerate.
smoothly and without pausing. The exertion stage of
each repetition should last about half as long as the
return stage. Proper breathing is important. Exhale
during the exertion stage of each repetition and inhale
The combination of strength training and aerobic exer-
cise will reshape and strengthen your body, plus devel- during the return stroke. Never hold your breath.
op your heart and lungs.
9
Rest for a short period of time after each set. The
ideal resting periods are:
• Rest for three minutes after each set for a muscle
building workout.
slowly as you stretch and do not bounce. Ease into
each stretch gradually and go only as far as you can
without strain. Stretching at the end of each workout
is an effective way to increase flexibility.
• Rest for one minute after each set for a toning work-
out.
STAYING MOTIVATED
• Rest for 30 seconds after each set for a weight loss
workout.
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.
For motivation, keep a record of each workout. List the
date, the exercises performed, the resistance used,
and the numbers of sets and repetitions completed.
Record your weight and key body measurements at
the end of every month. Remember, the key to achiev-
ing the greatest results is to make exercise a regular
and enjoyable part of your everyday life.
COOLING DOWN
End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move
MUSCLE CHART
O
A. Sternomastoid (neck)
A
B. Pectoralis Major (chest)
C. Biceps (front of arm)
D. Obliques (waist)
P
L
Q
B
E. Brachioradials (forearm)
R
S
F. Hip Flexors (upper thigh)
G. Abductor (outer thigh)
H. Quadriceps (front of thigh)
I. Sartorius (front of thigh)
J. Tibialis Anterior (front of calf)
K. Soleus (front of calf)
L. Anterior Deltoid (shoulder)
M. Rectus Abdominus (stomach)
N. Adductor (inner thigh)
O. Trapezius (upper back)
P. Rhomboideus (upper back)
Q. Posterior Deltoid (shoulder)
R. Triceps (back of arm)
C
D
E
T
F
M
N
U
G
H
I
V
W
X
J
K
S. Latissimus Dorsi (mid back)
T. Spinae Erectors (lower back)
U. Gluteus Medius (hip)
V. Gluteus Maximus (buttocks)
W. Hamstring (back of leg)
X. Gastrocnemius (back of calf)
10
PART LIST/EXPLODED DRAWING—Model No. 831.150260
R0703A
7
15
8
5
24
19
12
24
19
1
6
11
9
18
13
26
19
25
19
14
19
4
3
11
9
19
20
27
30
20
25
12
23
22
22
22
31
21
19
13
27
2
28
19
10
31
31
16
11
17
19
12
9
29
11
12
Description
18
Key No. Qty.
Description
Key No. Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
1
1
1
1
1
1
1
1
4
2
4
4
4
1
1
2
2
Frame
Front Leg
Rear Leg
Silver Stabilizer
Backrest Frame
Pivot Bracket
Backrest
Seat
Foam Pad
Pad Tube
25mm Square Inner Cap
50mm Round Outer Cap
50mm Square Inner Cap
45mm Square Inner Cap
25mm x 50mm Inner Cap
5-pound Dumbbell
18
19
20
21
22
23
24
25
26
27
28
29
30
31
#
4
10
2
1
4
1
4
3
2
2
1
1
2
4
1
1
1
M10 x 63mm Carriage Bolt
M10 Nylon Locknut
M10 Washer
Locking Pin
M6 Washer
M10 x 85mm Bolt
M6 x 16mm Bolt
M10 x 20mm Bolt
M10 x 70mm Bolt
M10 Large Washer
M4 x 16mm Screw
Black Stabilizer
M10 x 63mm Bolt
M6 x 60mm Bolt
User’s Manual
#
#
Exercise Guide
Grease Pack
3-pound Dumbbell
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover of
this manual for information about ordering replacement parts. If a part is missing, call toll-free 1-800-999-3756.
11
FULL 90 DAY WARRANTY
For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in this
WEIGHT BENCH EXERCISER, contact the nearest Sears Service Center throughout the United States
and Sears will repair or replace the WEIGHT BENCH EXERCISER, free of charge.
This warranty does not apply when the WEIGHT BENCH EXERCISER is used commercially or for
rental purposes.
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
Sears, Roebuck and Co., Dept 817WA, Hoffman Estates, IL 60179
Part No. 199080 R0703A
Printed in China © 2003 Sears, Roebuck and Co.
|